6 Alternative Ways To Clean A Deck Without A Power Washer

Step 2: Spray With Soapy Water & Scrub

Store decking on a flat level surface and always use proper supports , Do not store directly on the ground. All food spills should be removed as soon as possible. The surface must be cleaned within seven days to maintain the stain warranty.

Premixed Vs Concentrated Deck Cleaners

ReliaBoard and DockSider are composite products, and cleaning is NOT the same as for capped composite products such as TimberTech PRO and EDGE Collections. In preparation for cleaning you will need water for rinsing , the recommended deck brush with an extension handle, and TimberTech DeckCleaner. TimberTech DeckCleaner™ is formulated, field-tested, and approved for cleaning TimberTech AZEK® Deck or Porch, TimberTech PRO® Deck, TimberTech EDGE® Deck, and TimberTech Composite Rail. It is the best solution for seasonal cleanup, everyday spills, or stubborn spots. On average, one gallon diluted with one part cleaner to three parts water will clean approximately 1,000 square feet of surface area.

Can I Seal Composite Decking?

You can leave them as is, but if you want, you should probably be able to remove them using coarse sandpaper. You can also try using a wire brush, but be aware that certain types of composite timber have a bad reaction to metal, which could worsen the situation. Try it out on an inconspicuous section of your deck first.

• Decks created from earlier-generation Trex products should not be pressure washed, because doing so may damage the decking materials.
• Often, the only maintenance composite decking requires is an occasional power washing.
• The fast-acting foaming formula eliminates stains from mold and mildew, tree sap, pollen, oxidation, weathering and other grime.
• It utilizes the power of peroxide to provide high-performance cleaning without toxic or abrasive chemicals.
• Simple Green Oxy Solve Deck and Fence Cleaner is ideal for both manual and pressure washing to lift and remove dirt and debris from the deck surface.

Next, pour the solution on mold which is found on the surface of the composite deck. After scrubbing the surface of your composite deck for some time, rinse your deck using clean water. This step is very important because if the dirty water used in scrubbing is left to dry, a thin film may form on the surface of the deck. Vinegar – This is safe for both wood and composite decks. Just mix half a cup of apple cider vinegar or white vinegar to a gallon of water and ¼ cup of baking soda. Warm water – This can be used alone to clean and wash a composite deck. Don’t rely on semi-annual cleanings to remove grease stains from your Trex decking.

front deck in Canberra is cedar and I am so sick of scrubbing, brightening lightning, cleaning, oiling and sanding! I put composite in the back and I've been a little better." Use oxalic acid on rust stains and other stubborn spots. Deck brightener products will also work on these tougher stains. Sweep the deck and apply the product directly to the stain. Saturate the area and allow it to sit on the stain for about 15 minutes.

For plastic, a mixture of baking soda and warm water works. Just place the baking soda and water mixture in a spray bottle and apply on target surface.

Removing Stains

As for me--after getting a complete runaround from Trex --my plan this fall is to rip the damn stuff up and start over. Chlorine Bleach or Sodium Hypochlorite based deck cleaners that the uneducated recommend may appear to quickly remove mildew and mold fungus from Trex and other Composite Decking. We purchased a $20,000 "maintenance free" deck and within the first year, black mold spots began to appear.

How To Avoid Mold And Mildew Growth

With wooden furniture, a stain finish or polish will take care of most of the cleaning. Make sure that all pigment is mixed evenly into the stain. Apply one coat of Composite Deck Finish following label directions. After 30 minutes, brush or roll out any excess product puddled or pooled on the surface of the deck. If excess product is not removed, sticky, shiny spots may remain on the surface. Paint or cementitious materials are very difficult to remove. Make sure to cover the deck adequately prior to beginning any siding or roofing work adjacent to the surface of the deck.

How To Clean A Roof Safely, Effectively And Without Bleach

To remove tannin stains from debris, such as leaves, apply a commercial deck brightener once the Trex decking is dry. Make sure to follow the manufacturer instructions, and check to see if the product contains bleach or acid. If it does, it will lighten the color of your Trex decking, so apply some on an inconspicuous area first to see if you like the look. If the deck is made from a composite material, use a composite deck cleaner.